Massa Heavy Duty Precision Vertical Turning Lathes

Summit VL Series

Massa heavy duty ram type vertical turning lathes are designed for heavy duty and high precision cutting of medium and large parts. Meehanite cast iron frames and box ways ensure the machines have the rigidity to handle heavy cuts. The Massa machines also boast geared table drives that generate tremendous table torque. The large spindle motor coupled with a 2-speed ZF gear box delivers plenty of torque for heavy duty machining as well as the higher speeds you need for fine finishing.

Standard Equipment

4-Jaw Manual Chuck
Chip Conveyor, Chip Cart
Coolant System
Auto Lubrication System
Machine Guarding
LV Light
Heat Exchanger for Electrical Cabinet
Pilot Lamp
Hydraulic Power Pack
Auto Tool Change System
Spindle Gearbox Oil Chiller
Two Speed Gearboxes
Boring Mill Jaws
Tool Kit
Fanuc System Oi-TD (ATC)
Fanuc System 18i-TB (ATC+C)

Optional Equipment

3 or 4 Power Chuck + Hand Chuck
High & Totally Machine Cover
Air Conditioner for Electrical Cabinet
Linear Encoder
Navigation System for Crossrail
Coolant Through Spindle System
Increased Spindle Motor
Oil/Water Seperator
Automatic Door
Transformer
Active Tool Monitoring
Active Workpiece Checking
Tool Holder
Fanuc System 18i / 21i
Siemens System 802 / 820 / 840
Choice of Machine Colour
CE Mark EMC
Z Axis Special Extended Travel

Clamping System for Crossrail

Powerful machining, such as face milling, end milling, drilling and tapping.

Gear Transmission System for Table

4-Jaw Manual Table + Power 3 Jaw Chuck

C Axis Output Performance Chart 1

Fanuc- 8/8000i + ZF Gear Box (1/4)
7.5/11 kw (10/15 hp)
50~750 rpm/min (Low Speed)

C Axis Output Performance Chart 2

Fanuc- 8/8000i + ZF Gear Box (1/1)
7.5/11 kw (10/15 hp)
750~2400 rpm/min (High Speed)

Specifications

			VL-1000ATC	VL-1000ATC+C
Capacity	Table Diameter	mm	Ø1000	Ø1000
	Max. Swing Diameter	mm	Ø1200	Ø1200
	Max Turning Diameter	mm	Ø1100	Ø1100
	Max Turning Height	mm	900	900
	Max Load on Table	kg	4000	4000

#1 Spindle	Spindle Speed	rpm	2~600	2~600
	Max Torque N.m		10000	10000

#2 Spindle	Spindle Speed	rpm	N/A	2400
	Max Torque	N.m	N/A	550

Travel / Feed rate	X Axis Travel	mm	1250	1250
	Z Axis Travel	mm	800	800
	Vertical Travel of Crossrail	mm	500	500
	X Axis Rapid Feed Rate	mm/min	12000	12000
	Z Axis Rapid Feed Rate	mm/min	10000	10000
	Cutting Feed Rate	mm/rev	0.01~50	0.01~50
	Manual Feed Rate	mm/min	0~1260	0~1260

Tooling	Turrent (ATC) Type		Tool 12	Tool 16
	Type of Tool Shank		BT50	BT50
	Max. Tool Weight	kg	50	50
	Max. Loading of ATC	kg	360	450
	Tool Change Time (ATC)	sec	30	30

Motor	Spindle Motor (30min/Cont)	kw	37/45	37/45
	Spindle Motor (Cont/30min)	kw	N/A	7.5/11
	X Axis Servo Motor	kw	7.0	7.0
	Z Axis Servo Motor	kw	7.0	7.0
	CF Axis Servo Motor	kw	N/A	7.0
	Crossbeam Hoist Motor	kw	2.25	2.25
	Hydraulic Moto	kw	3.75	3.75
	Conveyor Motor	kw	0.375	0.375
	Motor of Coolant Pump	kw	1.5+1.1	1.5+1.1

Capacity	Hydraulic Tank	Litre	100	100
	Coolant Tank	Litre	700	700
	Machine Machine (LxW)	mm	3700×3300	3700×330
	Body Machine (H)	mm	4600	4600
	Machine Weight	kg	24000	25000
	Power Requirement kva	kva	75	85

			VL-1200ATC	VL1200ATC+C
Capacity	Table Diameter	mm	Ø1250	Ø1250
	Max. Swing Diameter	mm	Ø1600	Ø1600
	Max Turning Diameter	mm	Ø1350	Ø1350
	Max Turning Height	mm	1250	1250
	Max Load on Table	kg	5000	5000

#1 Spindle	Spindle Speed	rpm	2~300	2~300
	Max Torque N.m		12500	12500

#2 Spindle	Spindle Speed	rpm	N/A	2400
	Max Torque	N.m	N/A	550

Travel / Feed rate	X Axis Travel	mm	1475	1475
	Z Axis Travel	mm	900 (1200)	900 (1200)
	Vertical Travel of Crossrail	mm	800	800
	X Axis Rapid Feed Rate	mm/min	12000	12000
	Z Axis Rapid Feed Rate	mm/min	10000	10000
	Cutting Feed Rate	mm/rev	0.01~50	0.01~50
	Manual Feed Rate	mm/min	0~1260	0~1260

Tooling	Turrent (ATC) Type		Tool 12	Tool 16
	Type of Tool Shank		BT50	BT50
	Max. Tool Weight	kg	50	50
	Max. Loading of ATC	kg	360	450
	Tool Change Time (ATC)	sec	30	30

Motor	Spindle Motor (30min/Cont)	kw	37/45 (60/75)	37/45 (60/75)
	Spindle Motor (Cont/30min)	kw	N/A	7.5/11
	X Axis Servo Motor	kw	7.0	7.0
	Z Axis Servo Motor	kw	7.0	7.0
	CF Axis Servo Motor	kw	N/A	7.0
	Crossbeam Hoist Motor	kw	2.25	2.25
	Hydraulic Moto	kw	3.75	3.75
	Conveyor Motor	kw	0.375	0.375
	Motor of Coolant Pump	kw	1.5+1.1	1.5+1.1

Capacity	Hydraulic Tank	Litre	100	100
	Coolant Tank	Litre	700	700
	Machine Machine (LxW)	mm	4300×3800	4300×3800
	Body Machine (H)	mm	4900	4900
	Machine Weight	kg	32000	33000
	Power Requirement kva	kva	80	90

			VL-1600ATC	VL-1600ATC+C
Capacity	Table Diameter	mm	Ø1600	Ø1600
	Max. Swing Diameter	mm	Ø2000	Ø2000
	Max Turning Diameter	mm	Ø1800	Ø1800
	Max Turning Height	mm	1250	1250
	Max Load on Table	kg	8000	8000

#1 Spindle	Spindle Speed	rpm	2~256	2~256
	Max Torque N.m		18500	18500

#2 Spindle	Spindle Speed	rpm	N/A	2400
	Max Torque	N.m	N/A	550

Travel / Feed rate	X Axis Travel	mm	1650	1650
	Z Axis Travel	mm	900 (1200)	900 (1200)
	Vertical Travel of Crossrail	mm	800	800
	X Axis Rapid Feed Rate	mm/min	12000	12000
	Z Axis Rapid Feed Rate	mm/min	10000	10000
	Cutting Feed Rate	mm/rev	0.01~50	0.01~50
	Manual Feed Rate	mm/min	0~1260	0~1260

Tooling	Turrent (ATC) Type		Tool 12	Tool 16
	Type of Tool Shank		BT50	BT50
	Max. Tool Weight	kg	50	560
	Max. Loading of ATC	kg	360	450
	Tool Change Time (ATC)	sec	30	30

Motor	Spindle Motor (30min/Cont)	kw	37/45 (60/75)	37/45 (60/75)
	Spindle Motor (Cont/30min)	kw	N/A	7.5/11
	X Axis Servo Motor	kw	7.0	7.0
	Z Axis Servo Motor	kw	7.0	7.0
	CF Axis Servo Motor	kw	N/A	7.0
	Crossbeam Hoist Motor	kw	2.25	2.25
	Hydraulic Moto	kw	3.75	3.75
	Conveyor Motor	kw	0.375	0.375
	Motor of Coolant Pump	kw	1.5+1.1	1.5+1.1

Capacity	Hydraulic Tank	Litre	100	100
	Coolant Tank	Litre	700	700
	Machine Machine (LxW)	mm	4500 x4000	4500 x4000
	Body Machine (H)	mm	4900	4900
	Machine Weight	kg	35000	36000
	Power Requirement kva	kva	80	90

			VL-2000ATC	VL-2000ATC+C
Capacity	Table Diameter	mm	Ø2000	Ø2000
	Max. Swing Diameter	mm	Ø2500	Ø2500
	Max Turning Diameter	mm	Ø2300	Ø2300
	Max Turning Height	mm	1600	1600
	Max Load on Table	kg	10000	10000

#1 Spindle	Spindle Speed	rpm	2~200	2~200
	Max Torque N.m		46000	46000

#2 Spindle	Spindle Speed	rpm	N/A	2400
	Max Torque	N.m	N/A	730

Travel / Feed rate	X Axis Travel	mm	1875	1875
	Z Axis Travel	mm	1000 (1500)	1000 (1500)
	Vertical Travel of Crossrail	mm	1150	1150
	X Axis Rapid Feed Rate	mm/min	10000	10000
	Z Axis Rapid Feed Rate	mm/min	10000	10000
	Cutting Feed Rate	mm/rev	0.01~50	0.01~50
	Manual Feed Rate	mm/min	0~1260	0~1260

Tooling	Turrent (ATC) Type		Tool 12	Tool 16
	Type of Tool Shank		BT50	BT50
	Max. Tool Weight	kg	50	50
	Max. Loading of ATC	kg	360	450
	Tool Change Time (ATC)	sec	30	30

Motor	Spindle Motor (30min/Cont)	kw	60/75 (75/100)	60/75 (75/100)
	Spindle Motor (Cont/30min)	kw	N/A	11/15
	X Axis Servo Motor	kw	7.0	7.0
	Z Axis Servo Motor	kw	7.0	7.0
	CF Axis Servo Motor	kw	N/A	7.0
	Crossbeam Hoist Motor	kw	2.25	2.25
	Hydraulic Moto	kw	3.75	3.75
	Conveyor Motor	kw	0.375	0.375
	Motor of Coolant Pump	kw	1.5+1.1	1.5+1.1

Capacity	Hydraulic Tank	Litre	100	100
	Coolant Tank	Litre	700	700
	Machine Machine (LxW)	mm	6100 x4200	6100 x4200
	Body Machine (H)	mm	6950	6950
	Machine Weight	kg	43000	46000
	Power Requirement kva	kva	140	150

		VL-2500ATC	VL-2500ATC+C
Table Diameter	mm	ø2500	ø2500
Maximum Swing Diameter	mm	ø3000	ø3000
Maximum Turning Diameter	mm	ø2800	ø2800
Maximum Turning Height	mm	1600	1600
ATC		12 T(16/30/60/90 opt.)	16 T(30/60/90 opt.)
X, Z Axis Travel	mm	2525, 1200	2525, 1200
Crossrail Travel	mm	1150	N/A
#1 Spindle Speed	rpm	2~160	2~160
#1 Spindle Motor	kw	60 / 75 (75 / 100 opt.)	60 / 75 (75 / 100 opt.)
#2 Spindle Speed	rpm	N/A	2400
#2 Spindle Motor	kw	N/A	11 / 15
Machine (L x W x H)	mm	5500 x 7600 x 7000	5500 x 7600 x 7000
Machine Weight	kg	52000	53000

		VL-3000ATC	VL-3000ATC+C
Table Diameter	mm	ø3000	ø3000
Maximum Swing Diameter	mm	ø3500	ø3500
Maximum Turning Diameter	mm	ø1800	ø3400
Maximum Turning Height	mm	1800	1800
ATC		12 T(16/30/60/90 opt.)	16 T(30/60/90 opt.)
X, Z Axis Travel	mm	2775, 1500	2775, 1500
Crossrail Travel	mm	1150	N/A
#1 Spindle Speed	rpm	2~120	2~120
#1 Spindle Motor	kw	60 / 75 (75 / 100 opt.)	60 / 75 (75 / 100 opt.)
#2 Spindle Speed	rpm	N/A	2400
#2 Spindle Motor	kw	N/A	11 / 15
Machine (L x W x H)	mm	5500 x 8000 x 7600	5500 x 8000 x 7600
Machine Weight	kg	55000	56000

Specifications subject to change without notice

Other products you may like...

Massa CNC Vertical Lathes

View Product »